How to repair leaks in PEX tubing?
As with any other pipes, PEX is not prone to leaking. Nearly all of the plumbing leaks occur at joints (connection spots) and most of them are due to incorrect installation.
Much like installing PEX tubing, repairing it is also an easy process. If you’re using a crimp or clamp connection systems (both being very popular), using brass PEX fittings with copper or stainless steel crimp rings is the most inexpensive method of repairing PEX tubing.
How to avoid leaks when installing PEX:
- Pressure test and monitor the system as required by local building codes. If there’s a leak somewhere in the system, temperature gauge will give a lower reading than initially.
- If using a crimp connection system, use a Go-No-Go gauge to test the PEX connections for accuracy.
- Check the manufacturer’s manual for freeze protection and freeze prevention tips and installation requirements.
What you will need to repair PEX piping using a Crimp Method:
- PEX tubing
- PEX cutter
- PEX crimp tool of a proper size
- PEX fittings crimp style
- PEX crimp rings of a proper size
- Measuring tape
- Go-No-Go gauge
How it’s done:
- Using the PEX tubing cutter, remove the damaged/leaking section of PEX PIPE.
- Prepare a new piece of PEX PIPING that is slightly greater than the length needed to make the repair.
- Using a Crimp Connection Method, connect the tubing to fittings and check the connections with a Go-No-Go gauge.
PEX tube|PEX pipe|PEX tubing|PEX piping|PEX-AL-PEX|PEX plumbing|PEX fittings|PEX heating|PEX single layer pipe|multilayer pipe|composite pipe|multilayer composite pipe|five layer pipe|radiant heating|five layer pipe production line|PEX-AL-PEX pipe production line|PEX tube production line|
PEX-AL-PEX multilayer pipe|PEX pipe connection|multilayer pipe production line|
multi-layer PEX-AL-PEX pipe|multi-layer PEX-aluminum composite pipe|multi-layer PEX pipe|
PEX/Aluminum/PEX|PEX plumbing systems|PEX piping systems||